Customized manufacturer of electric dining tables and chairs for hotels - Foshan Lanhui Electric Dining Table
A customized manufacturer of hotel electric dining tables and chairs. Now that we have a good residential area, we also want a good set of electric dining tables. Our country is a country that loves wood products and is particularly fond of wooden products. Therefore, some merchants will fish in troubled waters and there are some cases of deceiving consumption. Therefore, when buying electric dining tables and chairs, we must not neglect it. Observing natural defects: Everyone knows that as long as wooden products have some unavoidable natural defects, there is a certain amount of stuttering, and some stuttering will extend to the back of the board. Looking at the pattern, if the pattern is relatively symmetrical, it can basically be determined as an electric dining table chair.
Observation of wood grain: Due to the prohibition of logging in some regions, the raw materials for wood are becoming increasingly scarce. Generally, the boards used for electric dining tables and chairs are processed boards with discontinuous wood grain. If the wood grain of large volume electric dining tables is beautiful, continuous, and cheap, it can be determined that it is unlikely to be fully electric dining tables and chairs. Observation section: the section is generally rough, and the growth rings can be seen to see whether it is made of a whole piece of wood. Smell: if it is not solid wood, the electric dining table made of particle board will generally have a pungent smell. The electric dining table chair has a natural wood smell. Sometimes, you can judge what kind of wood is used to make the electric dining table according to the wood taste. Observation of shape: If you see a very dazzling, artistic design, and diverse structural shapes, then you should pay attention to the price. If it is still very cheap, it is likely not made entirely of solid wood.
Color difference: If it is all solid wood, there will be a certain color difference, because there are certain differences in the color difference, color, and texture of natural wood. Getting started: Touching solid wood with your hand gives you a dry and astringent feeling of artificial paper, tapping with your hand makes a crisp sound, while the sound of artificial boards is relatively low. You can take it up and see its weight. Generally, solid wood has a heavier texture. One secret to determining whether solid wood is an electric dining table chair is: wood grain and scabbing, mainly looking at the door and side panels. Tip: Scar formation, wood grain, and cross section. Scar formation: Check the location of the scarred side and then look for the corresponding pattern on the other side.
Wood grain: The appearance appears to be a pattern, so corresponding to the position of this pattern change, when looking at the corresponding pattern on the back of the cabinet door, if it corresponds well, it is pure solid wood. Cross section: The color of the cross section is darker than the panel, and it can be seen that it is made of a whole piece of wood. Method/Step 2: Determine the tree species as a direct factor affecting price and quality. Ordinary electric dining tables and chairs are usually made of beech, white oak, ash, elm, catalpa, rubber, and oak, while precious mahogany electric dining tables are mainly made of rosewood, chicken wing wood, and rosewood. The market for electric dining tables and chairs is quite chaotic, with frequent occurrences of shoddy products and confusion of tree species. It is better to buy branded products, and it is important to note that the prices of wood are increasing day by day, and those that are too cheap can be deceitful. From cheap pine and oak wood to expensive mahogany, prices vary by tens of times. Therefore, don't ignore tree species just because they are solid wood. After all, solid wood such as pine has much worse performance than artificial boards in addition to environmental protection.
Method/Step 3: Observe the wood, open the doors and drawers of the electric dining table, observe whether the wood is dry, clean, and the texture is tight and delicate. If there is an electric dining table made of particle board, density board, primary molding board and other materials, open the cabinet door or drawer and smell to see if there is a pungent smell. Method/Step 4: Find the main load-bearing parts of the defective electric dining table, such as the columns and the load-bearing horizontal bars between the connecting columns near the ground, without large knots or cracks. The structure is firm, the frame must not be loose, and tenon or material breakage is not allowed. The components of the artificial board used on the electric dining table should undergo edge sealing treatment, and the installation of various accessories should not be short of parts, missing nails, or through nails.
When purchasing, it is important to carefully examine various details: several major defects of solid wood: cracking, scarring, insect eyes, mold cracking: naturally cannot be purchased. Scar: If there is a scar on the front and the same position on the back, this scar is basically a dead knot that will fall off over time. Therefore, an electric dining table with this defect cannot be purchased. Worm Eye: Although many electric dining tables claim to have undergone drying and degreasing treatment, when you think about China being so large, with so many electric dining table factories and weak national management, the credibility needs to be reduced by at least 50%. Don't buy anything except those Western style electric dining chairs with insect eyes engraved on them. Mouldy: It refers to the phenomenon of wood turning green and water stains that cannot be purchased. Although the sales aunt will tell you that it has already been dried, there is no problem. But when you think about it, will you still eat moldy bread after reprocessing? The properties of moldy wood are no longer comparable to before. Customized manufacturer of hotel electric dining tables and chairs